Product Description

1) This automatic batch pre-expander has a PLC and touch panel with a full automatic production cycle controlling filling electronic weighing, chamber temperature,pressure and level testing   
2) It uses an electronic weighing system and level sensor to control raw material volumes and expanded density, while ensuring density tolerances within 3%
3) With the adoptions of  the German comparison valve (installed additionally according to the customer's demand and Japanese high accuracies of the decompression valve control the temperature and the steam pressure in the chamber, which can guarantee the stability of the pressure in the decompression valve export, thus the chamber temperature is controlled to within ±1%, also guarantee the  consistency of the emanative raw material of EPS, and prevent if from agglomeration because of bad control of the temperature 
4) Adoptions of the automatically pressure relief and stress facility, and electronic weighing facility, combining to the material control which achieves the task of self-filling, thus offers high efficiency and low labor consumption 
5) Closed chamber keeps permanent pressure, and efficient heating helps save up to 50% steam compare to continuous pre-expanders 
6) With a closed efficient drying system in the expansion chamber, material can be dried in the chamber rather than having to use a long fluidized bed 
7) The machine has a fully automatic production cycle which controls filling, expanding drying, sieving, de-lumping and transportation to silo 
8) Electric appliances, power components, the valves etc are all local well-know brands, thus guarantee the machine operation stability, credibity and long service life    
9) Filling is done by a backpressure conveyor,which increase the filling speed
10) The computer has a memory function. The usually used EPS material producers's brand names, the size expanding technology, and the producing parameters etc all can be stored in it. When you need to use the raw material used before, all what you have to the originally stored producting model